UPLOAD PROBLEM

hi,

i have troubles uploading board , know wrong.

board type:  arduino due r3

i upload blink sketch but:

arduino: 1.6.6 hourly build 2015/10/13 11:34 (windows 7), board: "arduino duemilanove or diecimila, atmega328"

sketch uses 1 030 bytes (3%) of program storage space. maximum 30 720 bytes.
global variables use 9 bytes (0%) of dynamic memory, leaving 2 039 bytes local variables. maximum 2 048 bytes.
avrdude: stk500_recv(): programmer not responding
avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0xc0
avrdude: stk500_recv(): programmer not responding
avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0xc0
avrdude: stk500_recv(): programmer not responding
avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0xc0
avrdude: stk500_recv(): programmer not responding
avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0xc0
avrdude: stk500_recv(): programmer not responding
avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0xc0
avrdude: stk500_recv(): programmer not responding
avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0xc0
avrdude: stk500_recv(): programmer not responding
avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0xc0
avrdude: stk500_recv(): programmer not responding
avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0xc0
avrdude: stk500_recv(): programmer not responding
avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0xc0
avrdude: stk500_recv(): programmer not responding
avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0xc0

the "l" (pin13) led continuously light.

Arduino Forum > Using Arduino > Installation & Troubleshooting > UPLOAD PROBLEM

arduino