i've seen topics subject can't working.
hardware
raspberry pi model b+ (also tested pi 2 model b v1.1).
raspberry pi camera rev 1.3 (tested 2 cameras in case)
os installed (raspbian jessie lite), apt-get update & upgrade & rpi-update.
ribbon connected, there's led on permanently, after switching on raspberry. sunny conector in place.
executed raspi-config enable camera module.
when execute raspistill -o image.jpg:
idea? working 2 years ago, os version
hardware
raspberry pi model b+ (also tested pi 2 model b v1.1).
raspberry pi camera rev 1.3 (tested 2 cameras in case)
os installed (raspbian jessie lite), apt-get update & upgrade & rpi-update.
ribbon connected, there's led on permanently, after switching on raspberry. sunny conector in place.
executed raspi-config enable camera module.
when execute raspistill -o image.jpg:
code: select all
pi@raspberrypi ~ $ raspistill -o image.jpg mmal: mmal_vc_component_create: failed create component 'vc.ril.camera' (1:enomem) mmal: mmal_component_create_core: not create component 'vc.ril.camera' (1) mmal: failed create camera component mmal: main: failed create camera component mmal: camera not detected. please check camera module installed correctly
idea? working 2 years ago, os version
what vcgencmd get_camera command?
should see
pi@odyssey:/root$ vcgencmd get_camera
supported=1 detected=1
pi@odyssey:/root$
should see
pi@odyssey:/root$ vcgencmd get_camera
supported=1 detected=1
pi@odyssey:/root$
raspberrypi
Comments
Post a Comment